AMPLIFIERS
D-2.8
Protection against Overload,DC, Overheat Short Circuit, distortion limit and sub-low frequency and EM RF Interference Filter
Frequency Response
Thd+n
(20Hz-20KHz)
S/R Rate
Circuit Dimensions Package
Net Weight
Gross Weight
Slew Rate
Damping Factor
Voltage Gain
Input Sensitivity Input Impedance
Input Connectors
Output Connectors
: 10Hz - 20KHz / ±0.35dB
: ≤0.5% @ 8Ω1kHz
: >99dB
: 483mm*486mm*45mm
: 580mm*550mm*73mm
: 12Kg
: 13.5kg
: >30v/μs
: >5000 （8Ohm） 20Hz to 100Hz
: 47.7dB (32dB:189V)
: 32dB,35dB,38dB,41dB
: 10K Ω balance/ 20K Ω unbalance
: XLR Active balanced pin1 gnd/pin 2+/pin3-
: 2 Neutrik NL4 Sockets / 2 input posts
AMPLIFIER SPECIFICATIONS
D-4.25
Protection against Overload,DC, Overheat Short Circuit, distortion limit and sub-low frequency and EM RF Interference Filter
AMPLIFIER SPECIFICATIONS
Frequency Response
Damping Factor Slew Rate
Input sensitivity Thd+n
Snr
: 20Hz-30KHz,+/-0.5dB
: ＞3000
: 30V/μs
: 0.775V,1.1V,1.4V,2V optional
: ＜0.5%
: ≥99dB(A-Weighted)
Input Impedance
Power Supply
Required
Voltage Range
Input Connector
Output Connector
Product
Dimensions
Net Weight
: 10kΩ Balance /20kΩ Unbalance
: AC 200-240V ~50-60HZ
: PFC 100-240V
: Male & Female XLR
: Speakon
: 483×45×420mm
: 9.3 kg
D-4.52
Protection against Overload,DC, Overheat Short Circuit, distortion limit and sub-low frequency and EM RF Interference Filter
AMPLIFIER SPECIFICATIONS
Frequency Response
Damping Factor Slew Rate
Input sensitivity Thd+n
Snr
: 20Hz-30KHz,+/-0.5dB
: ＞3000
: 30V/μs
: 0.775V,1.1V,1.4V,2V optional
: ＜0.5%
: ≥99dB(A-Weighted)
Input Impedance
Power Supply
Required
Voltage Range
Input Connector
Output Connector
Product
Dimensions
Net Weight
: 10kΩ Balance /20kΩ Unbalance
: AC 200-240V ~50-60HZ
: PFC 100-240V
: Male & Female XLR
: Speakon
: 483×45×420mm
: 9.3 kg
D-4.3
Protection against Overload,DC, Overheat Short Circuit, distortion limit and sub-low frequency and EM RF Interference Filter
AMPLIFIER SPECIFICATIONS
Frequency Response
Damping Factor Slew Rate
Input sensitivity Thd+n
Snr
: 10Hz-20KHz,+/-0.5dB
: ＞3000
: 30V/μs
: 0.775V,1.1V,1.4V,2V optional
: ＜0.5%
: ≥99dB(A-Weighted)
Input Impedance
Power Supply
Required
Voltage Range
Input Connector
Output Connector
Product
Dimensions
Net Weight
: 10kΩ Balance /20kΩ
Unbalance
: AC 200-240V ~50-60HZ
: PFC 100-240V
: Male & Female XLR
: Speakon
: 483×45×420mm
: 12 kg
DA 1600
Protection against Overload,DC, Overheat Short Circuit, distortion limit and sub-low frequency and EM RF Interference Filter
AMPLIFIER SPECIFICATIONS
Frequency Response
Damping Factor Slew Rate
Input sensitivity Thd+n
Snr
: 20Hz - 20kHz
: ＞5000 （8Ohm） 20Hz to 100Hz
: 40V/μs
: 0.775V,1.1V and 1.4V
: ＜0.5%
: ≥100dB(A-Weighted)
Input Impedance
Power Supply
Required
Voltage Range
Input Connector
Output Connector
Product
Dimensions
Net Weight
: 20kohms Balance /10kohms Unbalance
: AC 200-240V~50-60HZ
: AC 110/220V
: Male & Female XLR
: Speakon
: 483mm×650mm×132mm
: 47 kg
DA 1800
Protection against Overload,DC, Overheat Short Circuit, distortion limit and sub-low frequency and EM RF Interference Filter
AMPLIFIER SPECIFICATIONS
Frequency Response
Damping Factor Slew Rate
Input sensitivity Thd+n
Snr
: 20Hz - 20kHz
: ＞5000 （8Ohm） 20Hz to 100Hz
: 40V/μs
: 0.775V,1.1V and 1.4V
: ＜0.5%
: ≥100dB(A-Weighted)
Input Impedance
Power Supply
Required
Voltage Range
Input Connector
Output Connector
Product
Dimensions
Net Weight
: 20kohms Balance /10kohms Unbalance
: AC 200-240V~50-60HZ
: AC 110/220V
: Male & Female XLR
: Speakon
: 483mm×650mm×132mm
: 47 kg
X26
Protection against Overload,DC, Overheat Short Circuit, distortion limit and sub-low frequency and EM RF Interference Filter
AMPLIFIER SPECIFICATIONS
Digital Speaker Management System
INPUT PROCESSING CHAIN
8 PEQs (Bell, High Shelve, Low Shelve) Input Gain, Mute, Polarity Delay
OUTPUT PROCESSING C
HAIN 9 PEQs (Bell, High Shelve, Low Shelve) HPF (Butterworth, LR, Bessel, -12dB/Oct,
-18 db/Oct, -24 dB/Oct, -48dB/Oct) LPF (Butterworth, LR, Bessel, -12dB/Oct, 18 db/Oct, -24 dB/Oct, -48dB/Oct)
RMS Limiter, Peak Limiter
Delay, Gain, Mute, Polarity
INPUTS
• 2 Balanced Inputs
• Maximum Input Level +18 dBu
• Input Impedance of 500 Ω
OUTPUTS
• 6 Balanced Outputs
• Maximum Output Level +18 dBu
• Output Impedance of 500 Ω SPECIFICATIONS
Dimensions (mm) : 482 (W) x 44 (H) x 205 (D) Net Weight : 2.5 Kg
AMPLIFIER SPECIFICATIONS
4D600
Protection against Overload,DC, Overheat Short Circuit, distortion limit and sub-low frequency and EM RF Interference Filter
Frequency Response
Damping Factor Slew Rate
Input sensitivity Thd+n
Snr
: 20Hz-30KHz,+/-0.5dB
: ＞250
: 29V/μs
: 0.775V,1.1V and 1.4V optional
: ＜0.1%
: ≥110dB(A-Weighted)
Input Impedance
Power Supply
Required
Voltage Range
Input Connector
Output Connector
Product
Dimensions
Net Weight
: 20kohms Balance /10kohms Unbalance
: AC 200-240V~50-60HZ
: AC 160-260V~50-60HZ
: Male & Female XLR
: Speakon
: 483×88×454mm
: 27 kg
D-48
Protection against Overload,DC, Overheat Short Circuit, distortion limit and sub-low frequency and EM RF Interference Filter
AMPLIFIER SPECIFICATIONS
Digital Speaker Management System
INPUT PROCESSING CHAIN
• 7 PEQs (Bell, High Shelve, Low Shelve)
• HPF (Butterworth, LR, Bessel, -12dB/Oct, -18 db/Oct, -24 dB/Oct, -48dB/Oct)
• LPF (Butterworth, LR, Bessel, -12dB/Oct, -18 db/Oct, -24 dB/Oct, -48dB/Oct)
• RMS Limiter, Peak Limiter
• Delay, Gain, Mute, Polarity
INPUTS
• 4 Balanced Inputs
• Maximum Input Level +20 dBu
• Input Impedance of 100 Ω
OUTPUTS
• 8 Balanced Outputs
• Maximum Output Level +20 dBu
• Output Impedance of 100 Ω
Dimensions (mm) : 483 (W) x 45 (H) x 157 (D) Net Weight : 2.5 Kg
DJM-4
4 Channel dj mixer/usb
USB input/output connect computer3.5mm mini-jack inputAdjustable booth output Balanced and unbalanced master outputRecord OutputDJ mic with talk-over switch (16dB) 5x stereo line inputs 3 x phono inputs 3 x microphone input (Balanced and unbalanced) Crossrader assign switches Cue and cue level control
AMPLIFIER SPECIFICATIONS
Power Supply
Weight
Dimensions
: 12 Val
: 1.2 Kg
: 35x266x45 mm
