TWEETERS
D 2425
1” THROAT TWEETER
A one inch titanium diamond diaphragm.
This titanium diamond structure combines the ruggedness of phenolic and composite type diaphragms with the outstanding frequency response of the fragile aluminium and exotic metal diaphragms.
Nontoxic titanium has no fatigue limit, it can last forever if not overdriven.
Throat Diameter
Mounting Type
Nominal Impedance
D.C Resistance
Power Capacity
Sensitivity 1W/1M
Voice Coil Diameter
Flux Density
Magnet
Diaphragm Material
Voice Coil Material
Voice Coil Former
: 1” (25 mm)
: Bolt on
: 8 ohms
: 6.2 ohms
: 80 W Continuous power
: 110 dB
: 44.45 mm
: 1.8 T
: Strontium Ferrite
: Titanium
: CCAR
: Kapton
DM 22
1” THROAT TWEETER
Improves driver performance, reliability, increased power handling, and the linearity of diaphragm excursion.
Engineered for a more transparent high end, less distortion and overall improvement to your system.
Throat Diameter
Mounting Type
Nominal Impedance
D.C Resistance
Power Capacity
Sensitivity 1W/1M
Voice Coil Diameter
Flux Density
Magnet
Diaphragm Material
Voice Coil Material
Voice Coil Former
: 1” (25 mm)
: Screw
: 8 ohms
: 5 ohms
: 80W Continuous
: 107 dB
: 51 mm
: 1.8 T
: Strontium Ferrite
: Titanium
: CCAW
: Resin Bonded Kapton
DE 880 N
1.4” THROAT TWEETER
Shorting copper cap for extended HF response.
Polycarbonate phase plug which provides you with excellent linear high response. Result is excellent high to your ears which is at the best price to performance ratio.
Copper inductance ring on the phase plug ensures with good extended response.
Throat Diameter
Mounting Type
Nominal Impedance
D.C Resistance
Power Capacity
Sensitivity 1W/1M
Voice Coil Diameter
Flux Density
Magnet
Diaphragm Material
Voice Coil Material
Voice Coil Former
: 1.4” (36 mm)
: Bolt on
: 8/16 ohms
: 6.8/12.0 ohms
: 110 W Continuous power
: 108 dB
: 75 mm
: 1.9 T
: Neodymium
: Titanium
: ALR
: Kapton
DE 85
2” THROAT TWEETER
Shorting copper cap for extended HF response.
Polycarbonate phase plug which provides you with excellent linear high response. Result is excellent high to your ears which is at the best price to performance ratio.
Copper inductance ring on the phase plug ensures with good extended response.
Throat Diameter
Mounting Type
Nominal Impedance
D.C Resistance
Power Capacity
Sensitivity 1W/1M
Voice Coil Diameter
Flux Density
Magnet
Diaphragm Material
Voice Coil Material
Voice Coil Former
: 2” (51 mm)
: Bolt on
: 8 ohms
: 6.8 ohms
: 100 W Continuous power
: 108 dB
: 75 mm
: 1.9 T
: Neodymium
: Titanium
: ALR
: Kapton
de 750
2” THROAT TWEETER
Shorting copper cap for extended HF response. Polycarbonate phase plug which provides you with excellent linear high response.
​
Result is excellent high to your ears which is at the best price to performance ratio.
Copper inductance ring on the phase plug ensures with good extended response.
Throat Diameter
Mounting Type
Nominal Impedance
D.C Resistance
Power Capacity
Sensitivity 1W/1M
Voice Coil Diameter
Flux Density
Magnet
Diaphragm Material
Voice Coil Material
Voice Coil Former
: 2” (50 mm)
: bolt on
: 8 ohms
: 6.2 ohms
: 110 W Continuous power
: 108 dB
: 75 mm
: 1.9T
: Strontium Ferrite
: Titanium
: CCar
: Kapton
DE 750 a
2” THROAT TWEETER
Shorting copper cap for extended HF response.
CNC cut phase plug which provides you with excellent linear high response. Result is excellent high to your ears which is at the best price to performance ratio.
Copper inductance ring on the phase plug ensures with good extended response.
Throat Diameter
Mounting Type
Nominal Impedance
D.C Resistance
Power Capacity
Sensitivity 1W/1M
Voice Coil Diameter
Flux Density
Magnet
Diaphragm Material
Voice Coil Material
Voice Coil Former
: 2” (50 mm)
: Bolt on
: 8 ohms
: 6.2 ohms
: 110 W Continuous power
: 108 dB
: 75 mm
: 1.9T
: Strontium Ferrite
: Titanium
: CCAR
: Kapton
D 91
2” THROAT TWEETER
2’ Middle Range Driver | Unique Patented Design
118 dB sensitivity 1 W/ 1m | 300 Hz Crossover
90 mm Voice Coil
8/ 16 ohms
Throat Diameter Nominal Impedance Power Capacity (AES) Peak Power
Max SPL
Sensitivity
1W/1m
Frequency Range Recommended Crossover
Min. Impedance Modulus Voice Coil Diameter
Magnet Material
Flux Density (Tesla)
Efficiency
Voice Coil Material
Voice Coil Former
Diaphragm Material
: 2” (50 mm)
: 8/16 ohms
: 150 W AES above 400 Hz
: 1000 W peak above 500 Hz
: 136 dB at 150 W
: 118 dB on 2242 Horn
: 200-9000 Hz
: 300 Hz
: 8.3 Ohm at 5 kHz
: 3.5 (90mm)
: Ferrite
: 1.95
: 35% (300-5000Hz)
: Copper Clad Aluminium
: Kapton
: Polyester
2” THROAT TWEETER
D 90
​Extended bandwidth (300 - 22000 Hz) Point source sound reproduction Excellent phase coherence With two subsystems in one, each driver covers a smaller frequency range for increased power handling, high dynamics and extremely low distortion Perfect time alignment without problems of multi-source interference
: 2” (50 mm)
: 8/16 ohms
: 105 W AES above 400 Hz
: 1000 W peak above 500 Hz : 80 W
: 450 W
: 118 dB on 2242 Horn
: 300-22000
: 300 Hz
: 300- 7000 Hz
: 6000- 22000 Hz
: 6300 Hz
: 1.75 (44.4 mm)
: 3.5 (90 mm)
: Ferrite
: 1.95 (mid), 2.1 (high)
: 35% (300-5000 Hz)
: Copper Clad Aluminium
: Kapton
​
​
​
: Polyester
: 182 mm (+/- 3 mm)
: 192 mm
: 9 kg
Throat Diameter
Nominal Impedance Power Capacity
Middle Middle Range (AES) Peak
High Range (AES)
Peak
Sensitivity 1W/1M
Frequency Range (Hz) Recommended Crossover Middle Frequency Range
High Frequency Range Middle/ High Crossover
Voice Coil High Range
Voice Coil Mid Range
Voice Coil Material
Flux Density (Tesla)
Efficiency
Voice Coil Material
Voice Coil Former
Diaphragm Material
​
Mounting Information
Overall Diameter
DepthNew Weight
4x M6 holes, 90 on 101.6 mm, 4’’ diameter
D 99
2” THROAT TWEETER
Extremely High Efficiency.
Specially Designed for extreme high output applications. Ultra light weight and small size.
Throat Diameter
Nominal Impedance
Power Capacity (AES)
​
Sensitivity 2x1W/1m
Frequency Range Recommended Crossover Voice Coil
Magnet Material
Flux Density Mid-Range Voice Coil Material
Voice Coil Former Diaphragm Material
: 2” (50 mm)
: 2x8 / 2x16 ohms
: 400W (2x200W above 300 Hz)
: 123 dB on a 40x20 waveguide
: 200-9000 Hz
: 250 Hz
: 2x3.5’’ (2x90mm)
: Neodymium
: 1.95 T
: Copper (2 Layers of the VC) : Kapton
: Polyester
2” THROAT TWEETER
N 850
​Extremely reliable and wide width bandwidth device that also features very high fidelity. The D760 is a large format titanium based diaphragm assembly mated to a close spaced circumferential phase plug geometry. The voice coil is a rectangular geometry high temperature aluminum to insure extended high frequency response. The large two inches (51mm) throat exit makes the 750 an excellent choice for high sound pressure level performance.
: 2” (50 mm)
: Bolt on
: 8 ohms
: 6.2 ohms
: 100 W Continuous power
: 108 dB
: 76 mm
: 1.8 T
: Strontium Ferrite
: Titanium
: Aluminum Flat Wire
: Resin Bonded Kapton
Throat Diameter
Mounting Type
Nominal Impedance
D.C Resistance
Power Capacity Sensitivity 1W/1M
Voice Coil Diameter
Flux Density
Magnet Diaphragm Material
Voice coil Material
Voice Coil Former